Fiberglass Reinforced Cured-in-Place Lining System

PerpetuWall™ is a cured-in-place composite liner system comprised of fiberglass cloth and a two-component, solvent-free 100% solids, ultra high build epoxy mastic designed to protect from corrosion and stop transmission of fluids also known as infiltration or exfiltration. PerpetuWall™ forms a monolithic liner that completely bonds and conforms to the host structure regardless of shape and size. The liner can be used as the primary protective barrier for structures or as part of a secondary containment system. PerpetuWall™ is designed for use with concrete and masonry structures, but can also be used on timber, metal, and plastic structures.

Typical Uses

New or existing structures where waterproofing is required, or areas where exposure to concentrated acids or other caustic materials may be expected, such as:

  • Manholes
  • Lift Stations
  • Clarifiers
  • Digesters
  • Tanks
  • Large Diameter Pipes
  • Chemical Troughs
  • Wastewater Facilities
  • Secondary Containment
  • Floors and Walls
  • Waterproofing for concrete, metal, and wood
Downloads

 PLS-650 PerpetuWall Product Data Sheet

PLS-650

Physical Properties

  • Hardness ASTM D-2240
    • 72 Shore D
  • Tensile strength ASTM D-638
    • 29,200 PSI
  • Compressive strength ASTM D-695
    • 16,800 PSI
  • Flexural strength ASTM D-790
    • 34,300 PSI
  • Ultimate Elongation ASTM D-638
    • 4.50%
  • Bond (Concrete) ASTM D-4541
    • Substrate Failure
  • Flexural modulus ASTM D-790
    • 1,590,000 PSI
  • Shear Strength ASTM D-2344
    • 4,060 PSI
  • Heat Distortion ASTM D-648
    • 220ºF
  • VOCs:
    • None
  • Cure Time:
    • Approx. 4 hours at 70ºF
  • Typical Installation Thickness:
    • 145-180 mils
  • Color:
    • Grey